what actually connects to what, and why
All gear / Monitor Controller

Dynaudio Control 02

Monitor Controller · Dynaudio · unverified extraction · manufacturer page

ManufacturerDynaudio
TypeMonitor Controller
Poweredactive

Connections

ConnectorCarriesDirection
DB25 / D-sub 25-pin (Tascam or AES pinout)Analog audio, line leveloutput
RJ45 / EthernetDante audio over IPoutput
ThunderboltUSB Audio Class 2.0 (class-compliant, driverless)output
MADI (coaxial, BNC)MADI (AES10) multichannel digital audioin/out
RCA / phonoADAT Lightpipeinput
RCA / phonoADAT Lightpipeoutput
BNCWord clockinput
BNCWord clockoutput
1/4 inch TRSAnalog audio, headphone leveloutput

What the Dynaudio Control 02 can feed

Devices whose inputs accept what this one puts out, directly or with the cable noted.

Power Amplifier 85
Studio Monitor 45
AD/DA Converter 43
Audio Interface 35
Recorder 27
JoeCo BBP1A (needs USB-C cable), JoeCo BBP1B (needs USB-C cable), JoeCo BBP1D (needs USB-C cable), JoeCo BBP1U (needs USB-C cable), JoeCo BBP64-DANTE (needs USB-C cable), JoeCo BBP64-MADI (needs USB-C cable), JoeCo BBR64-DANTE, JoeCo BandMate (needs USB-C cable), Sound Devices 888, Sound Devices MixPre-10 II, Sound Devices MixPre-3 II, Sound Devices MixPre-6 II, Sound Devices Scorpio, TASCAM DA-6400 / DA-6400dp, TASCAM DR-05X (needs USB-C cable), TASCAM DR-05XP, TASCAM DR-07X (needs USB-C cable), TASCAM DR-07XP, TASCAM DR-10L Pro, TASCAM DR-10X (needs USB-C cable), TASCAM DR-40X (needs USB-C cable), TASCAM DR-40XP, TASCAM FR-AV2, TASCAM FR-AV4 and 3 more
Monitor Controller 17
Subwoofer 16
Stagebox / Expander 15
Analog Mixer 13
Behringer Xenyx 502S (needs USB-C cable), Behringer Xenyx X1832USB (needs USB-C cable), Dynacord PowerMate 3 (PM600-3 / PM1000-3 / PM1600-3 / PM2200-3) (needs USB-C cable), Mackie ProFX6v3, Samson MXP124FX (needs USB-C cable), Solid State Logic BiG SiX, Soundcraft Notepad-12FX (needs USB-C cable), Soundcraft Notepad-8FX (needs USB-C cable), TASCAM Model 12, Yamaha MG10XU (needs USB-C cable), Yamaha MG12XU (needs USB-C cable), Yamaha MG20XU (needs USB-C cable), Yorkville Sound VGM14 (needs USB-C cable)
Install Processor 9
PA Loudspeaker 8
Wireless System 8
Digital Mixing Console 8
Summing Mixer 8
Personal Monitoring 6
Hardware Effects 6
Headphone Amp / Distribution 4
Preamp 3
Microphone 2
Mobile Device 1
Cable 1
Headphones 1
500-Series Chassis 1
Recording Console 1
Clock 1
CB Electronics TC-5net Midi (needs USB-C cable)

What can feed the Dynaudio Control 02

Devices whose outputs this one accepts.

Audio Interface 8
AD/DA Converter 4
Stagebox / Expander 3
Preamp 1
Monitor Controller 1

Check a specific pairing

The lists above are one-step connections. To check a full chain, including adapters, gain and phantom power, ask about a specific pair on the main page.